The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They stop the vehicle from starting if the doesn't have a key fob. They also help to stop hotwiring or other traditional methods of vehicle theft. Newer methods such as key cloning or relay theft are becoming more prevalent.
To combat these latest trends, the ghost immobilise r works to make your car completely inaccessible. It doesn't rely on LED indicators or radio signals or key fobs and is quiet and stealthy.
Easy to install
The Ghost Immobiliser is a groundbreaking device, connects with the CAN data network of your vehicle to stop key cloning and theft. It is a TASSA-approved device and insurance companies also endorse it. It operates quietly and is almost undetectable to thieves. It makes use of buttons on your steering wheel as well as the centre console to create a unique pin-code sequence that you have to enter before you can begin the car. You can create as many as 20 different sequences to improve security. The system is easy to install and does not require any additional wiring or hardware.
It is recommended that you use an accredited CAN immobiliser installer that specialises in your particular vehicle model to get the best results. Ideally, they will have a workshop located in your local area, allowing you to visit and have your installation completed. They'll also have a variety tools and materials to assist you in the process of installing. These include hand tools, a multimeter, and insulation tape and heat shrink tubing to protect the connections. A user manual will provide specific instructions for your vehicle's wiring.
Before starting the installation Before beginning the installation, disconnect the battery to prevent short circuits and airbag deployment. It is crucial to confirm the location of the CAN H and CAN L wires, since an incorrect identification could result in unintentional system integration. It is also a good idea to label or mark the wires. Use a multimeter to confirm that the power source is providing the same 12V.
Advanced thieves employ a variety of methods to evade Ghost Immobilisers. This includes jamming or spoofing. These methods work by amplifying signals sent from the key fob to the electronic controller unit. With advanced anti-jamming techniques and a constant monitoring system your vehicle will be protected from these sophisticated attacks.
Security Increased
Ghost immobilisers provide an additional layer of security to safeguard your car from theft. It uses a PIN protection system that can be entered by pressing buttons on your dashboard or steering wheel which makes it more difficult for thieves to take your car. The device is also designed to be hidden within the vehicle, and is devoid of LEDs or other signals that would warn thieves of its presence. It communicates with your car's ECU through the data bus, so it is not susceptible to the same hacking or relay attacks that can cripple conventional security systems.
The system is an excellent investment for those who own prestige vehicles, as they are at a higher risk of theft due to their value and popularity. Its enhanced security features protect against key duplicates, ECU swapping, and other threats to your car's security. Ghost immobilisers can be integrated with apps, meaning you can arm or disarm quickly. They can also have a service/valet mode that permits you to temporarily disable them while your vehicle is being serviced or repaired.
A ghost immobiliser has another excellent feature that is that it doesn't need any cutting of wire. This is a fantastic feature, especially if the vehicle is newer and does not have an immobiliser built in. Certain systems might also be able to integrate with the GPS tracking device, thereby providing an additional level of security for your vehicle. A GPS tracker may also aid in reducing the cost of insurance. If you decide to purchase a ghost immobiliser, ensure that it is TASSA-verified and that an experienced installer installs the device for you.
Compatibility with all major brands and models
The Ghost Immobiliser was designed to work with all major models and makes, securing your prized possessions from theft. It uses buttons in your steering wheel, centre console, or door panels to generate an individual pin code that must be entered before you can drive your vehicle. It is tamperproof, undetectable and backed by a three-year warranty. It is also fully endorsed by insurance providers. This means you can reduce your premiums.
The Ghost system is different from standard immobilisers that use the key fob for ignition control. It is directly connected to the engine controller through the CAN bus. This means it's impervious to tampering, and is virtually impossible to disable or remove and cannot be hacked by organised car thief gangs. The Ghost system can also be paired with an iPhone app to allow remote monitoring and management.
You can create a PIN code that is easy to remember, but mathematically, it is impossible for thieves to guess. You can customize and change the PIN at any time to protect your vehicle even if it's parked in a parking lot or on the street. You can also select a valet or service mode in case you need someone other than you to drive your car for a brief period for instance, when it's in the garage for maintenance. This is an excellent way to protect your car from being stolen by an unscrupulous mechanic. You can opt for the Ghost Call alert to give you extra peace of mind. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser is a highly effective security device that protects your vehicle from typical methods of theft such as key cloning and relay attacks. It works by connecting with the car's CAN data network and blocking communication with the engine ECU. This makes it difficult for thieves to copy or hack your vehicle, which makes the installation of this system a great idea for any driver.
After installation, you'll need to enter a PIN code up to 20 digits using the buttons on your dashboard and the steering wheel to begin the engine. The system is completely concealed, and therefore undetectable by thieves. It doesn't emit radio frequency signals. It can also be programmed to an individual-changeable PIN code which further enhances its security. The system is also designed to stop cutting of circuits which makes it nearly impossible to tamper with.
If you do get lost in your PIN, there are some systems that let you communicate with the immobiliser via an app on your smartphone and instantly disarm it. Some systems even have a valet/service setting that allows you temporarily to start your car for example when you drop it off at Valet Park or a garage.
The Ghost Immobiliser is also unnoticeable to thieves since it does not transmit any radio signals, a major advantage over other aftermarket car security systems. It is also simple to use and doesn't require complex wiring. It can be used in conjunction with dash cams for added safety. This dash cam is Thinkware F70, which features clear & crisp HD dashcam footage in 1080p HD, Format Free Technology and parking mode. The system can also be wired for maximum performance and durability.
Installation
If you want to protect your vehicle from thieves it is important to select the right immobiliser ghost. This device can in preventing theft of your car by blocking communication between the engine controller unit (ECU) and key fobs. This device prevents thieves from stealing and cloning the signal that allows you to start your vehicle. It also can detect when it has been tampered with and alert the owner of the vehicle.
The device is easy to install and can be integrated with the existing systems in your vehicle. It doesn't require any modifications to the wiring in your vehicle and can be placed in a hidden place like under the dashboard. Follow the instructions in the manual to ensure that the device is properly installed. After installation, it's important to test the system. This will ensure that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed in your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to remove or bypass the system. Installation typically takes between 2 and 3 hours.
When installing the Ghost it is recommended to look up the wiring diagram for your vehicle model. This will allow you to find the CAN High & Low wires. Low wires required to connect your Ghost to the engine of your vehicle. Double-check all connections to ensure they are secure and insulated.
Once the installation is complete, you can use the Ghost Immobiliser in normal operation. It will turn off your vehicle's ignition if it is not started using the correct PIN, which you can create yourself. The ghost of the immobiliser can be set to Service/Valet Mode for when you need your vehicle serviced or valet parked.